What is a mobile stand?
A mobile stand is a small, portable stand that can be used to hold devices such as phones and tablets while they are being used. They are typically made out of PVC pipe, and can be easily assembled using a few simple steps.
There are a number of different ways to make a mobile stand. One option is to use an existing object such as a book or magazine rack. Another option is to purchase a pre-made mobile stand online or at your local hardware store. Whichever route you choose, the steps involved will be similar.
First, measure the height, width and depth of the object you will be using as your mobile stand. Next, cut the PVC pipe to these specifications using a hacksaw or jigsaw. Make sure the cuts are equal around the entire circumference of the pipe, so that the stand is evenly balanced when assembled.
Next, sand the exterior of the pipe smooth using an electric sander or sandpaper. This will help prevent scratches from appearing on the screen when your device is placed on top of the stand. Once the exterior has been sanded down, apply a coat of paint or sealant to protect it from moisture and dust.
How to make a mobile stand from PVC
Making a mobile stand out of PVC pipe is a simple project that can be completed in just a few minutes. This stand can be used to hold any type of device, including phones, tablets, and laptops.
To make the stand, you will need:
1) PVC pipe {6-8 inches in length}
2) Cement {optional}
3) Jigsaw or saw {optional}
4) Drill {optional}
5) Hammer and nails {optional}
6)Screws { optional }
7) Wire hanger {optional}
1) Cut the PVC pipe into desired length. The shorter the better since you’ll be using it as a handle.
2) Straighten the pipe with a jigsaw or saw if needed. Be careful not to cut too deep or the pipe will be difficult to bend later on.
3) Place cement around one end of the pipe and screw it in place. Allow to dry completely.
4) Now, bend the other end of the pipe into an “S” shape. Make sure that the “S” is pointing down towards your device when your finished bending it. Hammer and nails can be
Where to buy a mobile stand?
You can find mobile stands at most convenience or hardware stores. You can also find them online, such as on Amazon.com. There are a few things to keep in mind when shopping for a mobile stand:
-The height of the stand must be taller than the tallest object you want to display, such as a plant.
-The width of the stand must be wider than the widest object you want to display, such as a picture.
-The mobile stand should have enough weight to hold the object securely.
-The mobile stand should have a flat surface so that your object can rest on it.
Conclusion
If you need a mobile stand that can be used for a variety of purposes, think about making your own using PVC pipe. This simple project is easy to follow and can be completed in just a few minutes. All you need are some supplies, including PVC pipe, screws, and bolts, and you’re ready to go. Once your mobile stand is finished, you’ll be able to use it for all sorts of tasks – from displaying your photos on the wall to holding up your signs during protests or rallies.